Solar Water Pumps

Solar water pumps are used throughout the world for a number of innovative applications. If you are in a remote area and the cost of running traditional water piping is cost prohibitive, a solar water pump may be the right solution for your water supply needs. Additionally, if you are looking to install a Solar Water Heaters system in your home, you will want to use the right solar water pump. Solar water pumps are used for pumping water for livestock, crop irrigation and even simple domestic water supply where a home or town is remote and off the water pipeline. That means you can pump water even when the electricity goes out!

Hydronic Circulators Solar Pump

Known as “Best Little Pump”, the Solar Pump motor, because of its efficient design, is
larger than motors designed to operate at 110 to 240 volts AC. Unlike standard motors that use electrical coils and electric current to create the magnetic field, which wastes precious
electricity, we use efficient permanent magnets. To produce the torque required to boost the pressure of the pumped liquid we use a heavy-duty, large-diameter armature with thick copper windings to reduce parasitic power consumption. The result is amazing – even in very weak sun the motor produces enough power to start the pump, power that is produced in the”greenest” of all possible methods.


• quiet, maintenance-free operation

• self-priming, positive displacement

• life expectancy of more than 20 years

• 10-year warranty

• easy and inexpensive to install

• provides for a healthier environment

• Universal Flange to Flange Dimension

• provides for a healthier environment

• less exposure to electromagnetic fields (EMF)




• No batteries, no gasoline or diesel generator are required

• For single-family home solar water heaters a 10 – 20 watt PV module is usually adequate

• It is so much easier to install than the conventional controller-based systems

• The Solar Pump is also suitable for low- f low irrigat ion and general water pumping

• The Solar Pump will run 2000 hours per year in mid-latitude countriess



Taco Pump – Hydronic Circulators

Taco Pumps are perfect for Hydronic Heating Applications for new construction and additions. The unique replaceable cartridge contains all the moving parts and allows the circulator to be serviced instead of replacing the entire Taco Pump. The quieter direct drive cartridge type “00” series circulator is self lubricating, contains no mechanical seal, and requires no maintenance. Taco Pumps come in many sizes for almost any heating need. Replacement Cartridge are also available.


• Unique Replaceable Cartridge Design—Field Serviceable

• Pressure Max 125 PSI and Temperature Max 240 degrees

• Unmatched Reliability—Maintenance Free

• Quiet, Efficient Operation

• Standard High Capacity Output—Compact Design

• Direct Drive—Low Power Consumption

• Universal Flange to Flange Dimension

• Manufactured in a Variety of Sizes to Match System Requirements

• Residential and Light Commercial Applications



Laing E10 Hydronic Heating Pump

The Laing E10 pump is specifically designed for Heating Water Circulation, Chiller Systems, Ozone Treatment and Saltwater and Freshwater Aquarium Circulation. The Laing E10 Centrigufal Pump uses up to 1/4 of the power of traditional hydronic pump so if perfect for those application where power consumption is an issue.


• The Laing E10 pump is specifically designed for the following uses:

• Water Circulation

• Chiller Systems

• Ozone Treatment

• Saltwater and Freshwater Aquarium Circulation

Laing E10 Centrigufal Pump uses up to 1/4 of the power of traditional hydronic pump so if perfect for those application where power consumption is an issue.

Laing E10 Hydronic Pump Specifications:


Capacities: 14 GPM

Max Head: 20 feet

Pipe Connections:

3/4″ and 1″ Barb Suction and Discharge

3/4″ MPT Suction and Discharge

Maximum Working Pressure: 50 PSI

Maximum Temperature: 140° F

Rotation: counter clockwise when viewed from the motor end


Electronically Commutated AC/DC/AC Spherical Motor

ECanned Spherical Type Motor

115 Volt 62 Watts 50/60 Hz, 3100 RPM

230 Volt 71 Watts 50/60 Hz, 3200 RPM

Automatic Overload Protection



Pump can be mounted horizontally or vertically with motor end down. Thermoplastic integrated pump bracket is adjustable to 4 different discharge angles.


Motor Bracket

Thermoplastic motor bracket is adjustable to 4 different discharge angles.

Ceramic Bearing Ball and Carbon Bearing Cap
High density ceramic bearing ball and graphite impeller bearing cap designed for high efficiency and long life.



Highly efficient, clog resistant open impeller is dynamically balanced with carbon bearing for smooth ultra quiet operation.



Casing is Volute type thermoplastic construction.


Mechanical Seal

Unique patented design has no mechanical seal which is a potential leak path.



Highly efficient and ultra quiet spherical motor design. Pump is designed for continuous operation. All ratings are within working limits of the motor.



Embedded microprocessor control is self protected against dry run conditions. Available with variable speed with PWM input or dial control (potentiometer) on the pump.


Noise level

Whisper quiet, less than 40 db.


Lightweight construction weighs less than 4lbs.